Our website uses cookies so that you can place orders and we can provide a better service. Continue to use the site as normal if you're happy with this, or find out how to manage cookies.
X
Add To Basket
JL Audio MX280/4
£0.00

MX280/4
JL Audio JL Audio Full Range Amplifier (MX280/4) - Car Audio Centre

Key Features

  • 4 Ch. Class D Full-Range Amplifier, 280 W
  • Rugged powder-coated finish
  • Gasketed cover for the controls
  • Stainless steel hardware for durability

  • Quickfind Code - 34309

    Product Details

    4-Channel Class D Full-Range Amplifier, 70 W x 4 @ 2 Ω / 50 W x 4 @ 4 Ω - 14.4V

     

    Engineered specifically for powersports applications, the 4-channel MX280/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.

    Generating a solid 50W x 4 into 4 ohms (14.4V, 1% THD), the MX280/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 140W x 2 into 4 ohms.

    Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.

    This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.

    Technical Specification
    Specification
    • @ 4 Ω 50 W RMS x 4
    • @ 2 Ω 70 W RMS x 4
    • Bridged @ 4Ω 140 W RMS x 2
    • @ 4 Ω 36 W RMS x 4
    • @ 2 Ω 52 W RMS x 4
    • Bridged @ 4Ω 100 W RMS x 2
    • Frequency Response 20 Hz - 20 kHz (+0, -1dB)
    • S/N Ratio, referred to highest rated power >89.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
    • S/N Ratio, referred to 1 W >68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
    • Damping Factor @ 4 Ω >60 / 50 Hz
    • Damping Factor @ 2 Ω >30 / 50 Hz
    • THD+N @ Rated Power <1% @ 2 Ω per Ch.
    • Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High)
    • Min.Copper Power / Ground Wire Gauge 8 AWG wire
    • Fuse Rating 35 A (AFS, AGU or MaxiFuse™)
    • Filter Mode(s) Low-Pass or High-Pass
    • Filter Slope(s) 12 dB/octave
    • Filter Frequency Range 35 Hz - 300 Hz
    • Detented, Calibrated Filter Freq. Potentiometers Yes
    • Filter Defeat Function Yes
    • Remote Level Control No
    • Remote Level Modes N/A
    • Channel Input Mode Switch Yes (2/3/4 ch.)
    • Pass-Through Preamp Output None
    • Source Channel Selection for PreOuts N/A
    • Height (H) 1.77 in / 45 mm
    • Width (W) 8.66 in / 220 mm
    • Depth (D) 3.09 in / 78.5 mm
    • Net Weight 3.18 lb / 1.44 kg
    Please wait...