Our website uses cookies so that you can place orders and we can provide a better service. Continue to use the site as normal if you're happy with this, or find out how to manage cookies.
X
Add To Basket
JL Audio XD600/6V2
£0.00

XD600/6V2
JL Audio JL Audio Full Range Amplifier (XD600/6V2) - Car Audio Centre

Key Features

  • 6 Channel Class D
  • Full-Range Amplifier, 600 W
  • Features a black powder-coat finish

  • Quickfind Code - 34353

    Product Details

    6-Channel Class D Full-Range Amplifier, 100 W x 6 @ 2 Ω / 75 W x 6 @ 4 Ω - 14.4V

    This incredibly flexible amplifier packs a serious full-range punch and delivers a staggering 100 watts to each of its six channels into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.

    With the XD600/6v2, you have lots of great options. Use it as a six-channel satellite amplifier with 75 W x 6 @ 4 Ω, or bridge four of its channels to create a staggered power four-channel amplifier with 200 W x 2 @ 4 Ω for your front satellites and 75 W x 2 @ 4 Ω for your rear satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2.

    The XD600/6v2 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz.

    The XD600/6v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.

    This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.

    Technical Specification
    Specification
    • @ 4 Ω 75 W RMS x 6
    • @ 2 Ω 100 W RMS x 6
    • Bridged @ 4Ω 200 W RMS x 3
    • @ 4 Ω 60 W RMS x 6
    • @ 2 Ω 90 W RMS x 6
    • Bridged @ 4Ω 180 W RMS x 3
    • Frequency Response 12 Hz - 22 kHz (+0, -1dB)
    • S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
    • S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
    • Damping Factor @ 4 Ω >150 / 50 Hz
    • Damping Factor @ 2 Ω >75 / 50 Hz
    • THD+N @ Rated Power <1% @ 2 Ω per Ch.
    • Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
    • Min.Copper Power / Ground Wire Gauge 4 AWG wire
    • Fuse Rating 50 A (AFS, AGU or MaxiFuse™)
    • Filter Mode(s) Low-Pass or High-Pass
    • Filter Slope(s) 12 dB/octave
    • Filter Frequency Range 50 Hz - 500 Hz
    • Detented, Calibrated Filter Freq. Potentiometers Yes
    • Filter Defeat Function Yes
    • Remote Level Control Optional (HD-RLC)
    • Remote Level Modes 2 or 4 or All Channels
    • Channel Input Mode Switch Yes (2/4/6 ch.)
    • Pass-Through Preamp Output None
    • Source Channel Selection for PreOuts N/A
    • Height (H) 2.05 in / 52 mm
    • Width (W) 10.23 in / 260 mm
    • Depth (D) 7.09 in / 180 mm
    • Net Weight 5.8 lb / 2.63 kg
    Please wait...