Our website uses cookies so that you can place orders and we can provide a better service. Continue to use the site as normal if you're happy with this, or find out how to manage cookies.
Add To Basket
Phoenix Gold RX110D

Phoenix Gold Phoenix Gold 10" Subwoofer DVC 4 Ohm RX110d - Car Audio Centre

Key Features

  • Built to move a lot of air without breaking the bank.
  • Feature long wound 2.0” coils.
  • Allows for 25mm of peak to peak excursion.

  • Quickfind Code - 34434

    Product Details

    Phoenix Gold subwoofers are overbuilt in virtually every way conceivable. It is important that the subwoofer’s enclosure is built to these same exacting standards. The enclosure must be constructed of at least .75 inch MDF. Screws or air staples are excellent construction fasteners when used with a strong bonding “yellow” wood working glue that can fill joint gaps. Be sure that the enclosure’s panels are airtight at all joining seams. Lining the walls with a polyester matting 1 to 3 inches thick is sufficient. Your PG dealer has extensive knowledge, tools and the experience needed for the design and construction necessary for your subwoofer application. We also recommend you consult with your dealer for specific technical assistance related to your installation. The charts provided should be used as a reference when building an enclosure for your subwoofer. The charts contain several enclosure types. The Sound Quality enclosure provides deeper, tighter, and more musical output to truly reproduce the original source material. The SPL enclosure fits the “basshead’s” need for maximum output while sacrificing some sound quality. The normal enclosure is a balance between SPL and SQ.

    Technical Specification
    • 500w RMS (*CEA-2031 rating)
    • 25mm of Peak to Peak Excursion
    • Dual 4 Ohms Voice Coil Model
    • High Excursion CAE/CAD Motor Design
    • Vented Kapton Former
    • One Piece Polypropylene Plated Dustcap
    • High Roll Butyl Rubber Surround
    • High Temperature 2.0 Inch OFC Copper Voice Coils
    • Nickel Plated 12 Gauge Speaker Terminal
    • Optimized for Sealed or Vented Enclosures
    • Powder Coated Anti-Resonant Steel Basket
    • Size - 10" (254mm)
    • RMS Power Handling - 500W RMS (CEA 2031)
    • Impedance - Dual 4ohm
    • Frequency Response - 20Hz to 300Hz
    • Mounting Depth - 133mm
    • Mounting Diameter - 235mm
    • Overall Diameter - 263mm
    • Xmax (Peak to Peak) - 25mm
    • Fs - 33.8Hz
    Please wait...