Our website uses cookies so that you can place orders and we can provide a better service. Continue to use the site as normal if you're happy with this, or find out how to manage cookies.
X
Add To Basket
Phoenix Gold RX112
£0.00

RX112
Phoenix Gold Phoenix Gold 12" Subwoofer SVC 4 Ohm RX112 - Car Audio Centre

Key Features

  • The new Phoenix Gold R Series of subwoofers
  • Priced as entry level products
  • Ruggedly overbuilt.
  • Performance is anything but entry level.

  • Quickfind Code - 34440

    Product Details

    To have a closer look at these woofers for ourselves, we asked the good folks over at Phoenix Gold to send us an example of what they are about, and shortly after we received a sample in the from of an RX112. The RX112 is a 12-inch single voice coil woofer with an advertised impedance of four ohms and power handling of 200 watts. The R series woofers are also available in dual four ohms voice coil configurations. The woofer we received has a suggested retail price of $159.99 (USD) and comes with a one-year limited warranty.

    After unpacking the RX112 I have to admit I am rather perplexed with first impression of the cosmetics. As first blush, the woofer is quite plain looking, with a matte black poly cone and a matte black trim ring. The only contrast on the face of the woofer is the Phoenix Gold and RX logos on the cone and highlighted in a bright silver color. As I look closer at the woofer, I begin to understand what the designer originally intended. The cone is not too visually exciting, but it is designed with a deep trough in the center that provides additional strength and rigidity. Then I notice that the trim ring is also designed to completely hide the mounting screws for a clean finished appearance. So, I begin to see the beauty in the design after all.

    Looking behind the front of the speaker, I find a sturdy stamped steel basket made with four wide, reinforced spokes finished in a textured black powder coat. On the business end of the woofer, a custom-tooled rubber motor cover finishes off the magnet very nicely.

    Technical Specification
    Features
    • 25mm of Peak to Peak Excursion
    • Single and Dual 4 Ohms Voice Coil Models
    • High Excursion CAE/CAD Motor Design
    • Vented Kapton Former
    • One Piece Polypropylene Plated Dustcap
    • High Roll Butyl Rubber Surround
    • High Temperature 2.0' OFC Copper Voice Coils
    • Nickel Plated 12 Gauge Speaker Terminal
    • Optimized for Sealed or Vented Enclosures
    • Powder Coated Anti-Resonant Steel Basket
    Specs
    • RMS Power Handling: 200W
    • Impedance: Single 4-Ohms
    • Mounting Depth: 5.75in - 145mm
    • Mounting Diameter: 11.125in - 282mm
    Please wait...